Name: CET CAFS
Category: Gas System
Item #: See below
Units:

ADVANTAGES OF A CET CAFS:
1. Class A foam allow faster fire suppression and
extinguishment than plain water.
2.Foam clings to most surfaces and protects exposures
much longer than plain water.
3.Class A foam may provide long-term cost savings
and may reduce property damage.
4.Class A foam increases efficiency and conservation
of water supply.
5. Class A foam can be produced at a relatively low cost.
6.Class A foam forms a protective blanket.
7.Foam is visible during and after application.
8. CAFS attack lines are lighter than plain water hose lines.
9. Foam use may help to preserve evidence of fire cause.
10. Class A foam aids wildland/urban interface attack.

Item# CET 35 CFM GAS
Engine
• 27 hp Kohler gas engine at 3600 RPM.
• 2 cylinders, 4 stroke, air-cooled.
• 20 amp. alternator.
Water Pump
• 175 gpm @ 100 psi.
• Max. flow 225 gpm.
• Max. pressure 145 psi.
• Single-stage centrifugal pump.
• Aluminum case with bronze impeller.
• Direct drive.
• Stainless steel piping.
Compressor
• Oil-injected piston-type.
• 35 cfm @ 125 psi.
• Water-cooled heads system.
• Compressed air is cooled w/ water cooler.
• Belt drive.
CAFS System
• NFPA 125 gpm & 35 cfm @ 125 psi.
• 4 outlet discharges 1” or 1-1/2”.
• Automatic balancing system.
• 1” tank fill line.
• 2-1/2” tank to pump, 2-1/2” intake.
• Air service line.
Dimensions
• 34” length x 44” width x 26” height.
Weight
• 650 lb.
For more information, click here.

Item# CET 35 CFM DIESEL
Engine
• 25 hp Kubota diesel engine at 3600 RPM.
• 3 cylinders, 4 stroke, liquid cooled.
• 40 amp. alternator.
Water Pump
• 150 gpm @ 100 psi.
• Max. flow 225 gpm.
• Max. pressure 150 psi.
• Single-stage centrifugal pump.
• Aluminum case with bronze impeller.
• Direct drive.
• Stainless steel piping.
Compressor
• Oil-injected piston-type.
• 35 cfm @ 125 psi.
• Water-cooled heads system.
• Compressed air is cooled w/ water cooler.
• Belt drive.
CAFS System
• NFPA 110 gpm & 35 cfm @ 125 psi.
• 4 outlet discharges 1” or 1-1/2”.
• 1-1/2” fresh water outlet.
• 1” tank fill line.
• 2-1/2” tank to pump, 2-1/2” intake.
• Air service line.
Dimensions
• 38” length x 48” width x 32” height.
Weight
• 800 lb.
For more information, click here.

Item# CET 60 CFM GAS
Engine
• 38 hp Kohler gas-engine at 3600 RPM.
• 2 cylinders, 4 stroke, air-cooled.
• 25 amp. alternator.
Water Pump
• 160 gpm @ 100 psi.
• Max. flow 250 gpm.
• Max. pressure 180 psi.
• Single-stage centrifugal pump.
• Aluminum case with bronze impeller.
• Belt drive.
• Stainless steel piping.
Compressor
• Oil-injected piston-type.
• 60 cfm @ 125 psi.
• Compressed air is cooled w/ water cooler.
• Belt drive.
CAFS System
• NFPA 125 gpm & 60 cfm @ 125 psi.
• 4 outlet discharges 1” or 1-1/2”.
• 1”tank fill line.
• 1-1/2” fresh water outlet.
• 2-1/2”tank to pump, 2-1/2” intake.
• Air service line.
• Stainless steel panel control.
Dimensions
• 40” length x 48”width x 36”height.
Weight
• 1,250 lb.
For more information, click here.

Item# CET 60 CFM DIESEL
Engine
• 32 hp Kubota diesel-engine at 3000 RPM.
• 3 cylinders, 4 stroke, liquid-cooled.
• 40 amp. alternator.
Water Pump
• 160 gpm @ 100 psi.
• Max. flow 225 gpm.
• Max. pressure 145 psi.
• Single-stage centrifugal pump.
• Aluminum case with bronze impeller.
• Belt drive.
• Stainless steel piping.
Compressor
• Oil-injected piston-type.
• 60 cfm @ 125 psi.
• Compressed air is cooled w/ water cooler.
• Belt drive.
CAFS System
• NFPA 130 gpm & 60 cfm @ 125 psi.
• 4 outlet discharges 1” or 1-1/2”.
• 1” tank fill line.
• 1-1/2” fresh water outlet.
• 2-1/2” tank to pump, 2-1/2” intake.
• Air service line.
• Stainless steel panel control.
Dimensions
• 40” length x 48” width x 36” height.
Weight
• 1,500 lb.
For more information, click here.

Item# CET 80 CFM DIESEL
Engine
• 44 hp Kubota diesel engine at 3000 RPM.
• 4 cylinders, 4 stroke, liquid-cooled.
• 40 amp. alternator.
Water Pump
• 200 gpm @ 100 psi.
• Max. flow 210 gpm.
• Max. pressure 250 psi.
• Single-stage centrifugal pump.
• Aluminum case with bronze impeller.
• Belt drive.
• Stainless steel piping.
Compressor
• Oil-injected screw-type.
• 80 cfm @ 125 psi.
• Air/oil-cooled w/ water cooler and radiator.
• Compressed air is cooled w/ water cooler
• Belt drive.
CAFS System
• NFPA 175 gpm & 80 cfm @ 125 psi.
• 4 outlet discharges 1” or 1-1/2”.
• Automatic balancing system.
• 1-1/2” fresh water outlet.
• 1” tank fill line.
• 2-1/2” tank to pump, 2-1/2” intake.
• Air service line.
• Stainless steel panel control.
Dimensions
• 48” length x 48” width x 40-1/2” height.
Weight
• 1,800 lb.
For more information, click here.

Item# CET 150 CFM DIESEL
Engine
• 59 hp Kubota diesel-engine at 2700 PRM.
• 4 cylinders, 4 stroke, liquid-cooled.
• 40 amp. alternator.
Water Pump
• 200 gpm @ 100 psi.
• Single-stage centrifugal pump.
• Aluminum case with bronze impeller.
• Belt drive.
• Stainless steel piping.
Compressor
• Oil-injected screw-type.
• 150 cfm @ 125 psi.
• Air/oil-cooled w/ water cooler.
• Compressed air is cooled w/ water cooler.
• Belt drive.
CAFS System
• 4 outlet discharges 1” or 1-1/2”.
• Automatic balancing system.
• 1-1/2” fresh water outlet.
• 1” tank fill line.
• 2-1/2” tank to pump, 2-1/2” intake.
• Air service line.
• Stainless steel panel control.
Dimensions
• 48” length x 48” width x 46” height.
Weight
• 2,000 lb.
For more information, click here.

►Other Options available.

►Call for pricing.